1st of all thanks for all the information..
2nd-to
Stationmaster i cant see the twin tower from my window..i need to get outside of my house to get the view.
3rd- ok2..i admit..i have only a little basic in circuit design and PLC..this is a project i need to do..'Control the single phas A/C motor using PLC'..the circuit i uploaded is my frens circuit for conveyer belt..its not for speed control but direction control..
i roughly design a circuit but the circuit is kinda for Dc circuit like in the picture..as i stated im also using relay..
im not sure which wire (hot,neutral,ground) to connect to the plc..
for the motor im using 240vac(stated on the motor) which is a washing machine motor..
the PLC is in the univ lab..im not sure what brand..but i remembered it uses the syswin software..
maybe im asking too much here..but please dont scold me bcoz im a noob..i can back off from the forum and close this topic if neccessary..