Unregistered
Guest
U
While trying to connect PG720 to CP527 through STEP5 i have message PLC timed out. May be some driver needed or some else???
You need the additional package COM GRAPH to configure this type of card. The best source of information for this kind of obsolete card is the Siemens website . Under 'Search area' select 'Search for all documents', enter the search word(s) 'CP527' and click 'Go'. You should get 22 hits, I hope among these is what you're looking for.
Kind regards,
Kind regards,
Similar Topics
Hi
Complete newcomer to S7 so go easy on me...
Siemens S7: What cable do I need to connect S7-1200 PLC to HMI?
The touch screen is one of these...
I am going to daisy chain a couple Modbus devices off of a Click plc using rs 485. There will be three slave devices daisy chained off one another...
Hi all,
Please understand that I am not good at English.
I have plan to project with one of our customer have the Ls XGB-XBC-DR60SU PLC.
This PLC...
Hi guys!
My company wants to start offering remote PLC support to our customers.
Currently, we use software called LogMeIn, which we can...
Hi all,
I am new to PLC's and need to connect 60 pressure sensors to a PLC.
Also the data from the sensors needs to be sent to a central location...