spence144db
Member
ok I have a noob question that I am sure someone on here will shoot out an answer in 1 second and make me feel stupid.
I have a 3 pos switch the will represent times, pos 1 will be 15min timer, pos 2 will be 20 min timer, and pos 3 will be 25 min timer. This is for a table shotblast machine. the table will have to spin for the selected times (15,20,or 25mins)
The way that I have it programed now you can select pos 1 and it will run but if it is in cycle and you change the switch the timer will start again. So in theory if you keep moving the switch the timer will never stop and the table will keep spinning.
I need to make it so you set the time pos (1,2,or 3) and press start, once you have started the machine no matter what you do to the switch it will not make a difference
I know this is long, If i forgot something please let me know and Thx you in advance for all your guys help
I have a 3 pos switch the will represent times, pos 1 will be 15min timer, pos 2 will be 20 min timer, and pos 3 will be 25 min timer. This is for a table shotblast machine. the table will have to spin for the selected times (15,20,or 25mins)
The way that I have it programed now you can select pos 1 and it will run but if it is in cycle and you change the switch the timer will start again. So in theory if you keep moving the switch the timer will never stop and the table will keep spinning.
I need to make it so you set the time pos (1,2,or 3) and press start, once you have started the machine no matter what you do to the switch it will not make a difference
I know this is long, If i forgot something please let me know and Thx you in advance for all your guys help