Omron b7as-t6b1 and b7as-r6b31 modules

Killercal

Member
Join Date
Aug 2006
Location
Ontario
Posts
150
Hello all,

A customer has asked us to connect Input/Output blocks to their CC-Link network and have supplied the above modules. I've never worked with these and after doing a quick search it looks like these are not CC-Link compatible.

Has anyone worked with these and can they confirm that they will not work on CC-Link.

Thanks
 
No know anything regarding these?

The customer is saying they had these connected to CC-Link, but I'm not sure there are any switches to set an address, therefor not being able to work.

Any help would be appreciated.

Thanks.
 

Similar Topics

Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
178
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
71
Hi all, i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info. my unit has an ip address of...
Replies
3
Views
112
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
267
Hi There, I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
Replies
4
Views
147
Back
Top Bottom