geniusintraining
Lifetime Supporting Member + Moderator
I have a customer that bought a used machine (was told it was working) it has a C200HS omron cpu31 and a NT21, when he plugs in the cable there is an error on the HMI he made a new cable thinking that maybe it was a cable issue but it did not help, he bought a cable from me to try and upload the program from the PLC but they can not connect to the PLC either, there are some dip switches on the PLC any chance that the switches are in the wrong settings? he is using a trial software from Omron
See attached PICs on the errors, is there a way to see the COM settings on the HMI?
As always... thanks for the help
See attached PICs on the errors, is there a way to see the COM settings on the HMI?
As always... thanks for the help