kulgauravkanade
Member
Hey Fellas!
I am trying to interface an OMRON Cp1L 30 I/O PLC to an OMRON MX2 drive.
The application is fairly simple, I have two outputs coming from the PLC to the drive. Anyone of which if ON will switch OFF the drive (halt the operation of the motors). The drive will resume its operation when both, or the output which is ON, will return to the OFF state. (Obstruction detection application)
Can anyone help me with a standard digital interface between the PLC and the Drive. Also, do I need to program the Drive for it to understand the use of both the inputs.
This is a new application for me, I know its not very difficult but I'm not able to find a way through.
Cheers and TIA
I am trying to interface an OMRON Cp1L 30 I/O PLC to an OMRON MX2 drive.
The application is fairly simple, I have two outputs coming from the PLC to the drive. Anyone of which if ON will switch OFF the drive (halt the operation of the motors). The drive will resume its operation when both, or the output which is ON, will return to the OFF state. (Obstruction detection application)
Can anyone help me with a standard digital interface between the PLC and the Drive. Also, do I need to program the Drive for it to understand the use of both the inputs.
This is a new application for me, I know its not very difficult but I'm not able to find a way through.
Cheers and TIA