gtsuport
Member
Did you cycle power on the processor after you set dip switch?
Did you cycle power on the processor after you set dip switch?
I now have a new issue. The electrician powered the system down for 2 days and I can no longer connect to the PLC, like I did before. I fear the battery may have died and wiped the memory. I do have a back-up of the original however, it will not allow me to go online with it to even download it.
5. The fact you have no error lites is a good thing.
Hope this helps
3. Best way to connect CXP is the Peripheral port. Ensure switch 4 is off.
The correct cable from "Laptop" usb convertor to PLC RS232 port can be found here:
http://www.ia.omron.com/products/family/872/lineup.html
XW2Z-200S-CV
Did you cycle power on the processor after you set dip switch?
I/O Table missing?
Look at the cpu.
What led's are on, and are they solid or flashing?