ceilingwalker
Lifetime Supporting Member
Also just noticed, the data is coming from word 2018
--As your MC421 motion card is set to "Mach 0"--
Word 2018 and the next 29 words contains a lot of the data the MC card can share with the PLC.
:
I also noticed this is using G-code. That is very new to me. I have written parts programs for CNC machinery but not on the controls end. I have looked up some of the G commands and have no idea what they mean. I am sure these are specific to this type of a machine, the same as how G code in a mill could be the same number as one in a lathe however, they function entirely different. Sure did pick a somewhat complex system to learn on. Lol