rbbalaji
Guest
R
Hi ,
I am using this omron plc which is a sysmac mini sp10. I dont know the adresses that i have to use since it is a very old plc and i dont have any documentation. If anyone of you have used it before kindly share your knowledge with me. Another doubt i have is that i read output 24vdc. Does that mean that i cannot use 110VAC output. Then i have to change my plc cos i need 110vac. and i am familiar with the cpm1a plcs which has 1000 as the output address. what is the output address on minisp10 please.
thanks in advance.
bye,
balaji
I am using this omron plc which is a sysmac mini sp10. I dont know the adresses that i have to use since it is a very old plc and i dont have any documentation. If anyone of you have used it before kindly share your knowledge with me. Another doubt i have is that i read output 24vdc. Does that mean that i cannot use 110VAC output. Then i have to change my plc cos i need 110vac. and i am familiar with the cpm1a plcs which has 1000 as the output address. what is the output address on minisp10 please.
thanks in advance.
bye,
balaji