Omron XFER command

automatic

Member
A
Join Date
Aug 2004
Posts
136
Why doesn't this work? I am trying to run the XFER command on a CS1 and it's not transferring the data. The PLC is in RUN mode.

xfer.jpg
 
Last edited:

Similar Topics

D
Omron and GE data Xfer
Does anyone know how to exchange data between an Omron and GE PLC using TCP/IP???
Replies
3
Views
1,965
BobB
BobB
BobB
SMS messaging from an Omron CJ2M-CPU31
Has anyone done SMS messaging from an Omron CJ2J-CPU31 PLC? If so could you help please. Omron here in Oz have not had any experience doing this...
Replies
5
Views
180
BobB
BobB
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
1
Views
72
IO_Rack
IO_Rack
J
Omron CJ2m cpu33 - reading codes
Hi all, i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info. my unit has an ip address of...
Replies
3
Views
112
chelton
C
K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
267
KalvMavin
K
Back
Top Bottom