spaceacealpha
Member
I'm trying to hijack a laser's analog signal from a Modicon to a CLX5000. I ran the wires and did the hook up as normal parallelling in with the original. Seems like my resistance drops forcing my mA to double. Is there a trick way of doing this without knocking out the signal?
My other option is to send the analog signal direct to the CLX5000 and use its analog output to relay the information back to the Modicon. I just don't like the idea of my CLX5000 'needing' to be on all the time.
My other option is to send the analog signal direct to the CLX5000 and use its analog output to relay the information back to the Modicon. I just don't like the idea of my CLX5000 'needing' to be on all the time.