Robb B
Lifetime Supporting Member
Hi Everyone, trying to get an alternating output to work. Read through the forums on flip flop, toggle, etc. Found this site http://accautomation.ca/creating-a-flip-flop-circuit-in-the-plc/ which seems to do what I want, but not sure about implementing it on control logix. I tried with ONS and a similar logic, but not quite getting the results.
Basically, one input (joystick button) needs to activate output 1 with the first press, and output 2 with the second press while cancelling the previously activated output.
Basically, one input (joystick button) needs to activate output 1 with the first press, and output 2 with the second press while cancelling the previously activated output.