KingPresident
Member
I was looking for reference, and found this thread
http://www.plctalk.net/qanda/showthread.php?t=117141&highlight=multiple+plc+panelview
about multiple HMI's on one PLC, but is there a way to use one panelview for two or more PLC's?
I've got 1 Panelview +700 connected to 1 L30er. Now that L30er is writing message words to an SLC500(with no HMI) for part of the process. I Have another Panelview I could connect to the SLC500, but I'd rather save the money and incorporate it into the existing setup if possible.
http://www.plctalk.net/qanda/showthread.php?t=117141&highlight=multiple+plc+panelview
about multiple HMI's on one PLC, but is there a way to use one panelview for two or more PLC's?
I've got 1 Panelview +700 connected to 1 L30er. Now that L30er is writing message words to an SLC500(with no HMI) for part of the process. I Have another Panelview I could connect to the SLC500, but I'd rather save the money and incorporate it into the existing setup if possible.
Last edited: