rich_p
Member
Hi All!
We have a control panel that houses a VSD in an old shipping container. The control panel will be cooled with a fan and filter unit. So that the hot air from the control panel is not recirculated inside the shipping container we want to ditch the filter unit and pipe an outlet from the top of the control panel to the outside of the shipping container.
We have some spare 150mm pipe (area 17662mm^2) however the filter hole would have had an outlet of 31329mm^2. Is there are formula to calculate the reduction of airflow if using 1 piped outlet or the increase in airflow if we were to have two piped outlets?
Any help/ideas appreciated!
Cheers
We have a control panel that houses a VSD in an old shipping container. The control panel will be cooled with a fan and filter unit. So that the hot air from the control panel is not recirculated inside the shipping container we want to ditch the filter unit and pipe an outlet from the top of the control panel to the outside of the shipping container.
We have some spare 150mm pipe (area 17662mm^2) however the filter hole would have had an outlet of 31329mm^2. Is there are formula to calculate the reduction of airflow if using 1 piped outlet or the increase in airflow if we were to have two piped outlets?
Any help/ideas appreciated!
Cheers
Last edited: