Output is nc when connecting with wire.

Ark95

Member
A
Join Date
Apr 2024
Location
Selangor
Posts
1
Hi everyone, I need some help I new with omron plc. I using plc CP1L. When I do the program it's good and the plc is function as program. But when I wire the output the com and output are NC. How to change it back to NO?


Program:-
Normal input output
|-|--------( )
|-|--------( )
 

Similar Topics

P
Need help connecting open collector output to PLC input.
Hi, I have a Micrologix 1400 with a 1762-IQ16 discrete input module, wired for sinking inputs (common to DC-) I have an instrument with the...
Replies
5
Views
12,729
L33er
L33er
B
Connecting diagram of Analog output module to control valve (4-20mA) controls
Can anyone give me diagram when connecting a conrol valve (with two terminals - 4-20mA) to PLC Analog Output module? Thank you..
Replies
7
Views
5,301
Tom Jenkins
Tom Jenkins
J
PLC5 : Connecting differential output instrument to single-ended card
Hi all, I have a PLC5 rack that is actually full(No place for an aditionnal card). The rack has a couple of spare inputs on 1771-IFE cards and I...
Replies
5
Views
3,689
Mickey
Mickey
F
Connecting analog output module to 24V AC (0-10V) instrument
Hi guys, I've a field instrument (actuator) using 24V AC, 0-10V. The terminal connection as below: Terminal 1 = 24VAC Terminal 2 = 24VAC Com...
Replies
3
Views
3,953
Steve Etter
Steve Etter
N
Connecting Tone Selector to 24VDC source output module
Hello, I need help. I am trying to connect a 3 tone extension modules to 2 ouput. The output module is 24VDC (DC source). Please see attached. At...
Replies
1
Views
4,238
bernie_carlton
bernie_carlton
Back
Top Bottom