kram1230 Member K Join Date Aug 2007 Location DERBYSHIRE Posts 2 Sep 19, 2007 #1 Does anyone know whether or not a Master Control function can be overridden to allow an output on under an engineering test?
Does anyone know whether or not a Master Control function can be overridden to allow an output on under an engineering test?
parky Member P Join Date Oct 2004 Location Midlands Posts 5,759 Sep 21, 2007 #2 The master control is in essence a jump if not enabled (turned on) round the logic you would need to get your engineering level to turn on the MCR. but this will enable all logic in that segment controlled by the MCR.
The master control is in essence a jump if not enabled (turned on) round the logic you would need to get your engineering level to turn on the MCR. but this will enable all logic in that segment controlled by the MCR.