Panel View - Where to use Notification and Handshake Tags?

RMore

Member
R
Join Date
Dec 2011
Location
Kenmore, NY
Posts
64
I see fields in the Rockwell PanelBuilder environment (in data entry )for specifying optional Notification and Handshake Tags. Under what circutmstances would these be necessary, and/or useful?

Is it always safe to leave these blank?
 

Similar Topics

T
Panel View Tag issue.
I have a German programed ME program. I want to know what tag in the PLC a latched button turns on. However when I open up the tag properties I...
Replies
14
Views
226
bkottaras
B
H
Upgrade ram and cf card panel view plus
Am asking if we can upgrade sd ram and cf card of panel view plus ab by a normal sd ram and cf card but Allen Bradley to save cost because in ab...
Replies
9
Views
289
heshamtaha
H
W
Trying to Load FactoryTalk View ME Program V_11 to Panel View with FactoryTalk View ME V_13
I can't seem to get the Panel View Plus 7 standard edition to downgrade to V_11, when I check the AB downloads and compatibility websites for this...
Replies
1
Views
143
plvlce
P
A
Panel view plus 7
Good morning, I have a question, I would like to know if I can send an Excel file to an email from my panel view and see how it is possible to...
Replies
1
Views
164
robertmee
R
R
Panel View Plus 7 Performance & Windows 7
I want to run a factory talk view ME project in a Panel View Plus 7 Performance HMI. The project was developed in a 'Windows 7 Professional 64 bit...
Replies
5
Views
342
RRY
R
Back
Top Bottom