Fuenta14
Member
Hi Everyone,
I'm converting from Panelbuilder 32 to FT ME. After importing I received this two errors:
1- Bit and LSBit triggered alarms that used a Trigger Tag with a Bit data type will only be able to trigger a single alarm after import.
2- Alarm message Ack option not supported.
I verified under alarm setup list and the trigger value enables only one bit per.
If my first conversion sorry if I didn't explained clearly.
Next I want to go from FT ME to SE and I want to make sure how to proceed with these prior this.
Thank You for your time in advance.
I'm converting from Panelbuilder 32 to FT ME. After importing I received this two errors:
1- Bit and LSBit triggered alarms that used a Trigger Tag with a Bit data type will only be able to trigger a single alarm after import.
2- Alarm message Ack option not supported.
I verified under alarm setup list and the trigger value enables only one bit per.
If my first conversion sorry if I didn't explained clearly.
Next I want to go from FT ME to SE and I want to make sure how to proceed with these prior this.
Thank You for your time in advance.