Has anybody seen this error message occur before on a Panelview +1000 touchscreen HMI?
"Out of Memory"
My customer says sometimes when the message is acknowledge the HMI re-boots itself.
The project is very small and I am only trending 10 tags at 1 sample / 60s.
I have done much bigger projects and never had this error message appear.
Any thoughts welcomed!
regards
"Out of Memory"
My customer says sometimes when the message is acknowledge the HMI re-boots itself.
The project is very small and I am only trending 10 tags at 1 sample / 60s.
I have done much bigger projects and never had this error message appear.
Any thoughts welcomed!
regards