fishenguy
Member
I have a system with a SLC 5/04 AB CPU.
This had two Panelview 1000s, Cat. #2711-T10G8, using DH+ Comm.
One of the Panelviews crapped out and was sent out for repairs.
In the meantime,I found a Panelview 1000, Cat. #2711-T10C3X on our shelf. This has comm. ports for DH485 and RS232.
Can I somehow program (through Panelbuilder 32)the one I found on our shelf to work with the SLC 5/04 and the other Panelview still in use?
If so, please let me know what cable I need to run between it and the PLC.
Thanks, Dave
This had two Panelview 1000s, Cat. #2711-T10G8, using DH+ Comm.
One of the Panelviews crapped out and was sent out for repairs.
In the meantime,I found a Panelview 1000, Cat. #2711-T10C3X on our shelf. This has comm. ports for DH485 and RS232.
Can I somehow program (through Panelbuilder 32)the one I found on our shelf to work with the SLC 5/04 and the other Panelview still in use?
If so, please let me know what cable I need to run between it and the PLC.
Thanks, Dave