Hi. I have now a PanleView 550 (2711-B5A2, Rev A, FRN 4.20) and try to establish communication with the RS500.
Tried directly between laptop and PV550 with the 1747-PIC box. Don't see anything on RSLinx.
Tried through the SLC503 cpu (RJ plug, DH485). On PV550 the comm LED is steady on, but could not see on the RSlinx. PanlBuilder did not see it either.
When trying to upload, PanleBuilder is giving me this: Error (1022) - Target is not an operator terminal.
Tried to wipe out the memory on th PV550 but dont know how.
Either communication way would be ok.
Tried directly between laptop and PV550 with the 1747-PIC box. Don't see anything on RSLinx.
Tried through the SLC503 cpu (RJ plug, DH485). On PV550 the comm LED is steady on, but could not see on the RSlinx. PanlBuilder did not see it either.
When trying to upload, PanleBuilder is giving me this: Error (1022) - Target is not an operator terminal.
Tried to wipe out the memory on th PV550 but dont know how.
Either communication way would be ok.
Last edited: