zachary.wilson
Member
Howdy Everyone,
We had to replace a panelview 600 2711-B6c20 the other day and when we did, the new one none of the screen selector buttons work. As in pressing the buttons to go from one screen to the other (controlled by the hmi itself) do not work. All the buttons/inputs going back to the plc work fine so i know it isn't a dead spot on the screen. I cannot find anything about if this is a option selected somewhere or what. we used the file that was in the old one, so I believe it isn't in the hmi program itself (panelbuilder32). Any ideas would be great, we did a work around for now with the hard buttons f1 thru f10, but that is cumbersome to remember which is which. thank you.
We had to replace a panelview 600 2711-B6c20 the other day and when we did, the new one none of the screen selector buttons work. As in pressing the buttons to go from one screen to the other (controlled by the hmi itself) do not work. All the buttons/inputs going back to the plc work fine so i know it isn't a dead spot on the screen. I cannot find anything about if this is a option selected somewhere or what. we used the file that was in the old one, so I believe it isn't in the hmi program itself (panelbuilder32). Any ideas would be great, we did a work around for now with the hard buttons f1 thru f10, but that is cumbersome to remember which is which. thank you.