Hello,
I am working with a PLC MicroLogic 1500.
I used a mechanical switch (ON/OFF) to start/stop measurements by using Input I:0/0. It works fine.
Now I am using a C300 PanelView and will replace that switch with Function keys:
F2 = start measurements and F3 = stop measurements
Both F2 and F3 are Maintained Push buttons.
Tags: InputA: Boolean, address: I:0/0
Connections: Write Tag: Input A and Indicator Tag: InputA
How can I set 1 to I:0/0 by pressing F2 and set 0 to I:0/0 by pressing F3?
Best Regards
I am working with a PLC MicroLogic 1500.
I used a mechanical switch (ON/OFF) to start/stop measurements by using Input I:0/0. It works fine.
Now I am using a C300 PanelView and will replace that switch with Function keys:
F2 = start measurements and F3 = stop measurements
Both F2 and F3 are Maintained Push buttons.
Tags: InputA: Boolean, address: I:0/0
Connections: Write Tag: Input A and Indicator Tag: InputA
How can I set 1 to I:0/0 by pressing F2 and set 0 to I:0/0 by pressing F3?
Best Regards