Panelview Plus FTP User Authentication Fail After Restart

Halsec

Member
H
Join Date
Mar 2005
Posts
7
I have a Panelview Plus 7 recording data for a customer, who uses FTP to collect the data.
Currently it is setup to allow "anonymous" login for the FTP server.
The customer now wants to use a user and password.
This works fine until the HMI is rebooted.
Then none of the user/passwords will work for the FTP.
Any suggestions?
 
The RA Knowledgebase suggests that was a bug in the firmware for certain PV+ terminals between v8.2 and v10.

The document is ID # BF20879, Access Level: Everyone.
 

Similar Topics

M
FTP into PanelView Plus CE through an ENBT card
Hello community! I regularly FTP into our PanelView Plus CE devices when they are directly accessible to the network. However, I have some...
Replies
3
Views
1,022
MatthewAdkinsEE
M
D
PanelView Plus 6, firmware update, FTP, VNC
I just updated the firmware on a PanelView Plus 6 via a VPN connection. Prior to the update the FTP and VNC servers had been enabled. Now it...
Replies
5
Views
2,598
dginbuffalo
D
TimD
FTP and VNC Server issues with PanelView Plus
Hello, I have a new PanelView Plus 6 It must be a Rockwell bug, but items in the \windows\startup folder DO NOT execute until the FactoryTalk...
Replies
3
Views
11,263
Ken Roach
Ken Roach
J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
89
jscampbell210
J
C
Adding PanelView Plus 7 to the network
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
57
celso3093
C
Back
Top Bottom