Panelview Plus FTP User Authentication Fail After Restart

Halsec

Member
H
Join Date
Mar 2005
Posts
7
I have a Panelview Plus 7 recording data for a customer, who uses FTP to collect the data.
Currently it is setup to allow "anonymous" login for the FTP server.
The customer now wants to use a user and password.
This works fine until the HMI is rebooted.
Then none of the user/passwords will work for the FTP.
Any suggestions?
 
The RA Knowledgebase suggests that was a bug in the firmware for certain PV+ terminals between v8.2 and v10.

The document is ID # BF20879, Access Level: Everyone.
 

Similar Topics

M
FTP into PanelView Plus CE through an ENBT card
Hello community! I regularly FTP into our PanelView Plus CE devices when they are directly accessible to the network. However, I have some...
Replies
3
Views
1,029
MatthewAdkinsEE
M
D
PanelView Plus 6, firmware update, FTP, VNC
I just updated the firmware on a PanelView Plus 6 via a VPN connection. Prior to the update the FTP and VNC servers had been enabled. Now it...
Replies
5
Views
2,617
dginbuffalo
D
TimD
FTP and VNC Server issues with PanelView Plus
Hello, I have a new PanelView Plus 6 It must be a Rockwell bug, but items in the \windows\startup folder DO NOT execute until the FactoryTalk...
Replies
3
Views
11,280
Ken Roach
Ken Roach
C
Panelview Plus 7 Help
I've adjusted the IP of the Panelview Plus as well as the DNS servers; the screen does not show up in the search when I go to the transfer utility...
Replies
3
Views
105
patrickmoneyy
P
S
A&B Panelview plus 7
Replaced overlay and glass in HMI but now I can not calibrate the touch screen any suggestions.
Replies
1
Views
84
arpus4KM
A
Back
Top Bottom