Hi there,
I seem to be having some issues interfacing a Mircologix 1400 and a Panelview plus 1000. All communication is done over ethernet.
ML1400 (1766-L32BWAA) Ser.B FW.15 IP. 192.168.0.2
Pvp1000 Logic Module (2711P-RP2) IP. 192.168.0.100
Terminal (2711P-T10C4D2) Ser.A
I am able to create a simple application in Factory Talk View Studio - Machine Edition and create a runtime 6.0 application. I am able to test the application on the pc, where I can see the bit I have assigned, to the start button, go high and low in the rslogix500 program.
When I go to transfer the application I get an error saying there is an unrecognized device on the network, the ML1400.
Both the Micrologix and the Panelview are present in rslinx enterprise and classic.
I tried downloading the application without the ml1400 on the network and the application appeared, but obviously there was an error when there was no response from the plc.
I feel like im close im just not sure where to go from here.
Thanks for any help!
-Ian
I seem to be having some issues interfacing a Mircologix 1400 and a Panelview plus 1000. All communication is done over ethernet.
ML1400 (1766-L32BWAA) Ser.B FW.15 IP. 192.168.0.2
Pvp1000 Logic Module (2711P-RP2) IP. 192.168.0.100
Terminal (2711P-T10C4D2) Ser.A
I am able to create a simple application in Factory Talk View Studio - Machine Edition and create a runtime 6.0 application. I am able to test the application on the pc, where I can see the bit I have assigned, to the start button, go high and low in the rslogix500 program.
When I go to transfer the application I get an error saying there is an unrecognized device on the network, the ML1400.
Both the Micrologix and the Panelview are present in rslinx enterprise and classic.
I tried downloading the application without the ml1400 on the network and the application appeared, but obviously there was an error when there was no response from the plc.
I feel like im close im just not sure where to go from here.
Thanks for any help!
-Ian