The Plc Kid
Member
I have a press that has a pv 1000 standard connected to a slc 5/04 via RIO and when an alarm should be triggered in the plc i am getting the wrong alarm. Example in the plc a condition called psi plate activates an alarm the alarm bit is N253:3/11 and that alarm message is psi plate. But what happens is when N253:3/11 is active the next alarm in the list activates not psi plate. The alarm list is giving the alarm text for next alarm message instead of the one that is active. Anyone seen this?
Panelview is a 2711-T10C1 ser F FRN 4.46 and processor is 1747-L543 series c Os 401 FRN 10 or higher ( can't pull the processor to see the sticker )
Panelview is a 2711-T10C1 ser F FRN 4.46 and processor is 1747-L543 series c Os 401 FRN 10 or higher ( can't pull the processor to see the sticker )