PC to PLC connect prob thru TIA Portal

rbduck1

Member
R
Join Date
Mar 2013
Location
East Tennessee
Posts
19
I"m a newbe to Siemens PLC's. I'm trying to connect a Panasonic Toughbook to ET200s Siemens PLC using TIA Portal v11. I can get the TIA software to identify the plc in active devices and flash the LED's. I cannot go online with the PLC. I am using an ethernet connection. I have the MAC addressin the software. I and have the PC IP address as 192.168.0.1 and subnet of 255.255.255.0. What simple information am I missing here? Thanks in advance.
 

Similar Topics

S
Siemens PLC Main Disconnect Trip
The past week we received a new piece of equipment from Germany which utilizes siemens controls. Typically in our company we use A.B. controls for...
Replies
12
Views
353
JesperMP
JesperMP
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
155
Para
P
A
Why my PLC goes to not responde when ever i connect Analogue module?
I am using Mitsubishi PLC :FX3g and downloaded the program in it. When I connect Mitsubihi FX2N-4DA expansion module, it lost its communication...
Replies
3
Views
273
parky
P
A
Unable To Connect To GE PLC VersaMax
Hi, The VersaMax PLC suddenly stop running (no LED on run function) so I'm trying to upload the program. The HMI connected to it says "Host...
Replies
0
Views
144
Adele
A
A
omron nt31c connect with ls plc
hi hello every one . i have a Omron nt31c hmi and i want to connect with ls plc XBC DR60SU via rs232 . do any one now how ?? secondly :i have...
Replies
1
Views
202
ali1122turk
A
Back
Top Bottom