LoveDoctor
Member
Hello! First time poster, been reading forums ever since I graduated.
I am calling on the PLC gods to hopefully help me through an issue with the built in PDF reader in Factorytalk View - FoxItReader.
I am trying to access a PDF file on the removeable SD on the back of the panelview (Storage Card2) and get an error;
"There was an error opening this document. Sharing Violation!"
After two days of trying and a two hour long phone call with the Rockwell support center I have tried the following:
- Reading off a USB & Reading off a Storage card & Saving to\My Documents on the Panelview
The problem is that when accessing the file (Called M1.pdf) from FoxItReader on the Panelview the pdf opens and is readable!
FoxItReader also launches through the ActiveX control, but cannot launch the PDF for some reason.
Using ActiveX control MEprogramlauncher w literal strings
Program location: "foxitreader.exe"
Program Parameters: "\My Documents\M1.pdf"
Have tried all combinations of slashes etc... Any help would be greatly appreciated!!!
I am calling on the PLC gods to hopefully help me through an issue with the built in PDF reader in Factorytalk View - FoxItReader.
I am trying to access a PDF file on the removeable SD on the back of the panelview (Storage Card2) and get an error;
"There was an error opening this document. Sharing Violation!"
After two days of trying and a two hour long phone call with the Rockwell support center I have tried the following:
- Reading off a USB & Reading off a Storage card & Saving to\My Documents on the Panelview
The problem is that when accessing the file (Called M1.pdf) from FoxItReader on the Panelview the pdf opens and is readable!
FoxItReader also launches through the ActiveX control, but cannot launch the PDF for some reason.
Using ActiveX control MEprogramlauncher w literal strings
Program location: "foxitreader.exe"
Program Parameters: "\My Documents\M1.pdf"
Have tried all combinations of slashes etc... Any help would be greatly appreciated!!!