scadadavid
Member
I have been troubleshooting a Phoenix Contact Radio setup for 3 days now and have come up stumped. The system is set up on 3 offshore platforms, 1 home platform that contains the master and 2 outer platforms that have 1 slave on them. I have been mainly focused on the master radio since it is unable to communicate with both outer platforms. The antenna set up on the home platform is an approximately 70 foot LMR400 cable that comes into a High Gain Omni Antenna that is less than a mile from each outer platform. Each outer platform have a high gain Yagi antenna aimed perfectly at the Omni and I cannot establish comms for anything. Any help or insight in using these radios is helpful. Thanks.