PLC-2 to PLC-5 conversion

[JamesWSY]

Hi...
I have PLC-2 to PLC-5 conversion project, I want to convert GET and PUT instruction, I try to find PLC-5 instruction to replace it. How about PLC-5 addressing (I/O addressing from PLC-2). Any idea or suggestion?
Thank you.
James

 

[TConnolly]

Start Here:
http://literature.rockwellautomation.com/idc/groups/literature/documents/pm/1772-pm001_-en-p.pdf

here:
http://literature.rockwellautomation.com/idc/groups/literature/documents/rm/5000-rm004_-en-p.pdf

here:
http://literature.rockwellautomation.com/idc/groups/literature/documents/rm/1785-rm001_-en-p.pdf


and here:
http://literature.rockwellautomation.com/idc/groups/literature/documents/rm/5000-rm002_-en-p.pdf

 

[TConnolly]

And here:

http://domino.automation.rockwell.com/applications/kb/RAKB.nsf/0/9AD7A2D5130BEEA485256AFB0064833C?OpenDocument

 

[Gerry]

 -----[GET]---------------------(PUT)----

 

translates to MOV

A PLC-2 has no rack 0 - only 1 to 7

There is a dip-switch setting to change the local chassis in a PLC-5 system from rack 0 to 1 - handy if you want to retain existing PLC-2 I/O documentation.