Quack07
Member
I am in need of some help to perform a simple task in RSlogix5. We are using RSview32 to control heat zones on an extruder barrel.
We have individual on/off toggle buttons so that the operator can turn these zones on/off. These buttons just toggle the bits. 0 puts the zone in OFF mode. 1 puts the zone in AUTO mode.
They would like to add a "shutdown" button and a "heat up" button. The "shutdown" would turn all zones off. The "heat up" would turn all zones on.
How would I program this so that the individual buttons would work as well as the "do-all" buttons.
I am no programmer by any means. Troubleshooting and making simple changes is what I do.
Thanks in advance.
We have individual on/off toggle buttons so that the operator can turn these zones on/off. These buttons just toggle the bits. 0 puts the zone in OFF mode. 1 puts the zone in AUTO mode.
They would like to add a "shutdown" button and a "heat up" button. The "shutdown" would turn all zones off. The "heat up" would turn all zones on.
How would I program this so that the individual buttons would work as well as the "do-all" buttons.
I am no programmer by any means. Troubleshooting and making simple changes is what I do.
Thanks in advance.