SAD11 Member S Join Date May 2016 Location nashik Posts 1 May 28, 2016 #1 Why to upgrade a machine which was previously controlled by only PLC to the same machine controlled by CNC having inbuilt PLC?
Why to upgrade a machine which was previously controlled by only PLC to the same machine controlled by CNC having inbuilt PLC?
mendonsy Member Join Date Feb 2009 Location Western NY Posts 801 May 28, 2016 #2 Well .... that depends on what the machine is doing. A whole lot more information would be useful.
jstolaruk Lifetime Supporting Member J Join Date Dec 2004 Location Detroit, SE Michigan Posts 3,912 May 28, 2016 #3 Seek out a qualified integrator.
RussB Lifetime Supporting Member Join Date Oct 2003 Location Michigan Posts 2,914 May 28, 2016 #4 If the PLC was attempting to mimic a CNC in the original system there is a good possibility that using a real CNC will increase the accuracy and efficiency of the machine.
If the PLC was attempting to mimic a CNC in the original system there is a good possibility that using a real CNC will increase the accuracy and efficiency of the machine.