jthornton
Member
I am trying to develop a list of logical step by step diagnostics procedures for a machine controlled by a PLC for a friend who is a plant mechanic.
Something like
Is anything working, yes skip to step ...
no check power and fault lights on the PLC
...
stop the program from running by...
Check each input device to see if you are getting a signal light at the PLC card
etc.
If anyone has any ideas on this or places to look to get ideas I would greatly appreciate it.
TIA
John
Something like
Is anything working, yes skip to step ...
no check power and fault lights on the PLC
...
stop the program from running by...
Check each input device to see if you are getting a signal light at the PLC card
etc.
If anyone has any ideas on this or places to look to get ideas I would greatly appreciate it.
TIA
John