HI
Every time I connect to the dh+ network one of the PLC's loses its node address, and memory.
Using rslogix5 latest version, rslinx lite, pcmk connecting through ch1a.
PLC is a 5/60b. Tried changing the processor but same fault.
Tried leaving the processor key switch in run but when it crashes it still loses its marbles.
Also, if rslinx is running when you connect to the DH+ network, should this crash one of the plc's?
Please help
Kind regards
Adyb
Every time I connect to the dh+ network one of the PLC's loses its node address, and memory.
Using rslogix5 latest version, rslinx lite, pcmk connecting through ch1a.
PLC is a 5/60b. Tried changing the processor but same fault.
Tried leaving the processor key switch in run but when it crashes it still loses its marbles.
Also, if rslinx is running when you connect to the DH+ network, should this crash one of the plc's?
Please help
Kind regards
Adyb