I am having to replace an old saftronics VFD node 15 on Devicenet
connected to a SLC505 with a Powerflex 753 and a 20 COMM D
module.
I have added the drive FRM VER 10 to the DeviceNet
and mapped the input and output as normal. Now normally I am
used to seeing the assigned control word points from the device
inside the node its self.
Now what I am concerned about is the produced / consumed I see
in the module. I also am concerned on how the control data
gets mapped.
See attached
Any help would be appreciated.
connected to a SLC505 with a Powerflex 753 and a 20 COMM D
module.
I have added the drive FRM VER 10 to the DeviceNet
and mapped the input and output as normal. Now normally I am
used to seeing the assigned control word points from the device
inside the node its self.
Now what I am concerned about is the produced / consumed I see
in the module. I also am concerned on how the control data
gets mapped.
See attached
Any help would be appreciated.