I am having an issue with my 755 powerflex in one of my production lines.
I currently cant network with it whether i am connected via direct or across the plc network. Normally i can see it when online check parameters exc. i cannot as of now.
It is my main DC bus supply,i cant put an ip tool on it to ping it or ping it on the pc. it shows a "ALN-56.1 PF755T DC BUS SUPPLY ethernet/ip fault" on the HMI and on the H.I.M. (755) it shows a "SW Bus Over volt" fault code 13068
Im under quite the pressure by production and im not sure of my next move.
SOS
I currently cant network with it whether i am connected via direct or across the plc network. Normally i can see it when online check parameters exc. i cannot as of now.
It is my main DC bus supply,i cant put an ip tool on it to ping it or ping it on the pc. it shows a "ALN-56.1 PF755T DC BUS SUPPLY ethernet/ip fault" on the HMI and on the H.I.M. (755) it shows a "SW Bus Over volt" fault code 13068
Im under quite the pressure by production and im not sure of my next move.
SOS