F12 HW OverCurrent(The drive output current has exceeded the hardware current limit)
Check programming. Check for excess load, improper A084 [Boost
Select] setting, DC brake volts set too high or other causes of excess current.
I follow the Manual but the inverter still display fault.
d004 [Output Voltage] is higher about 5 Volts than the other inverters in the same environment.
Who can tell me why? Thanks!
Check programming. Check for excess load, improper A084 [Boost
Select] setting, DC brake volts set too high or other causes of excess current.
I follow the Manual but the inverter still display fault.
d004 [Output Voltage] is higher about 5 Volts than the other inverters in the same environment.
Who can tell me why? Thanks!