Hello,
I've got a problem when converting my old PanelBuilder aplication to the new FTView ME plataform due to the need of replacing my PanelView Plus 600 to a new one. The problems i mean are related with some alarm issues that i cant undestand.
The first warning message i got was:
Bit and LSBit triggered alarms that used a Trigger Tag with a Bit data type will only be able to trigger a single alarm after import.
So, what does it mean? What may occur if i don't treat this warning?
[FONT="]The second warning message i got was:
Alarm message Ack option not supported.
How to fix this warning? I won't be able to acknowlegde my alarms?
Also about the above question, the migrating manual says:
[/FONT][FONT="] In PanelBuilder32 software, the alarm ACK is on an individual message.
FactoryTalk View ME software does not support individual
acknowledgement of alarms. The alarm Ack is on the triggers.
But i didnt undestand neither found a solution to this warning.
Thanks in advance.
[/FONT]
I've got a problem when converting my old PanelBuilder aplication to the new FTView ME plataform due to the need of replacing my PanelView Plus 600 to a new one. The problems i mean are related with some alarm issues that i cant undestand.
The first warning message i got was:
Bit and LSBit triggered alarms that used a Trigger Tag with a Bit data type will only be able to trigger a single alarm after import.
So, what does it mean? What may occur if i don't treat this warning?
[FONT="]The second warning message i got was:
Alarm message Ack option not supported.
How to fix this warning? I won't be able to acknowlegde my alarms?
Also about the above question, the migrating manual says:
[/FONT][FONT="] In PanelBuilder32 software, the alarm ACK is on an individual message.
FactoryTalk View ME software does not support individual
acknowledgement of alarms. The alarm Ack is on the triggers.
But i didnt undestand neither found a solution to this warning.
Thanks in advance.
[/FONT]