timcph2008
Member
Hello,
I am using Unity Pro S V8.0 and Vijeo Designer V6.2, both are not licensed yet.
I followed tutorial video from youtube but I still cant get the same result with the videos.
Here are the things I did on Unity and vijeo:
Unity:
- Configured an Ethernet network, IP 10.10.10.1, Mask 255.255.0.0
- Built a basic motor control logic.
- Export projects as STU file.
- Build and Run PLC, no error and warnings
Vijeo:
- Configure a new equipment in IO Manager, IP 127.0.0.1 and TCP as protocol, also checked IEC61131 Syntax.
- Configure the Network, IP 10.10.10.1, Mask 255.255.0.0
- Linked the Unity variables.
- Created a lamp on HMI, set the variable as the Motor from Unity.
- Build and Start device simulation, no error and 1 warnings
"warning 2131: Enable Downlad Security to reduce unauthorized access to the target machine"
- HMI open successfully, but no action after I force value on Unity.
Do you guys see any mistake from the above information? Please leave any comment, and thank you for your help!
I am using Unity Pro S V8.0 and Vijeo Designer V6.2, both are not licensed yet.
I followed tutorial video from youtube but I still cant get the same result with the videos.
Here are the things I did on Unity and vijeo:
Unity:
- Configured an Ethernet network, IP 10.10.10.1, Mask 255.255.0.0
- Built a basic motor control logic.
- Export projects as STU file.
- Build and Run PLC, no error and warnings
Vijeo:
- Configure a new equipment in IO Manager, IP 127.0.0.1 and TCP as protocol, also checked IEC61131 Syntax.
- Configure the Network, IP 10.10.10.1, Mask 255.255.0.0
- Linked the Unity variables.
- Created a lamp on HMI, set the variable as the Motor from Unity.
- Build and Start device simulation, no error and 1 warnings
"warning 2131: Enable Downlad Security to reduce unauthorized access to the target machine"
- HMI open successfully, but no action after I force value on Unity.
Do you guys see any mistake from the above information? Please leave any comment, and thank you for your help!