Hello, I'm new in the forum...
I have:
CLX processor
AC input
AC output
DH+/RIO card
Panel View 1000 (PV)
I just want to control the PLC with the PV via DH+. The hardware is already connected and I think it doesn't have a problem with the communication because I entered in the configuration of the PV physically and the led of communication status is always green. The panel view puts an error line in the upper size of the screen (code error 685, File access error) and another error when I press the button that I create in the PV (code error 208, Unable to write to remote device). I mathced the tags in the PLC with the tags in the PV. I.E, I put the address N100:10/1 (BOOL type) in the PV and refered to the button that I want to press, and create a tag in the PLC with the address N100[10].1 wich is the same to the PV. If somebody knows what it's happenin I appreciate the help. Thanks.
I have:
CLX processor
AC input
AC output
DH+/RIO card
Panel View 1000 (PV)
I just want to control the PLC with the PV via DH+. The hardware is already connected and I think it doesn't have a problem with the communication because I entered in the configuration of the PV physically and the led of communication status is always green. The panel view puts an error line in the upper size of the screen (code error 685, File access error) and another error when I press the button that I create in the PV (code error 208, Unable to write to remote device). I mathced the tags in the PLC with the tags in the PV. I.E, I put the address N100:10/1 (BOOL type) in the PV and refered to the button that I want to press, and create a tag in the PLC with the address N100[10].1 wich is the same to the PV. If somebody knows what it's happenin I appreciate the help. Thanks.