Hi all again.
I finally configured a deviceNet Network between a l32e Controller with 1769-SDN and an AC Drive Bulletin Analog 160 SF1 with module 160-DN2.
I configured the network's nodes and nothing is in fault. But when i upload the drive's parameters i receive an error: "Impossibile trovare membro" (means "impossible find members") and the parameters' list doesn't update and i can't download new value of the parameters.
I have thought that even this is an eds file problem so i download the proper file from rockwell's site and i updates it into the rsnetworx but nothing is changed.
I attached a screen of the error.
Hope that you can help me again.
Thank you
I finally configured a deviceNet Network between a l32e Controller with 1769-SDN and an AC Drive Bulletin Analog 160 SF1 with module 160-DN2.
I configured the network's nodes and nothing is in fault. But when i upload the drive's parameters i receive an error: "Impossibile trovare membro" (means "impossible find members") and the parameters' list doesn't update and i can't download new value of the parameters.
I have thought that even this is an eds file problem so i download the proper file from rockwell's site and i updates it into the rsnetworx but nothing is changed.
I attached a screen of the error.
Hope that you can help me again.
Thank you