Hi everybody,
I'm trying to get a Productivity 1000 P1-550 processor and a Wittmann robot to communicate using a Anybus X-gateway Ethernet\IP Adapter - CANopen Slave. The robot side (CANbus) is working. I can open the HMS IP configurator, go to monitor, turn on a couple robot outputs and see bits change but I can't get the PLC Ethernet\IP to work. I'm attaching screen shots of the PLC and AnyBus configurations. I spent about an hour and a half online with Anybus yesterday and they were not able to figure it out. Could you guys take a look and help me out? Appreciate it guys.
Anybus X-Gateway PN AB7838-F
I'm trying to get a Productivity 1000 P1-550 processor and a Wittmann robot to communicate using a Anybus X-gateway Ethernet\IP Adapter - CANopen Slave. The robot side (CANbus) is working. I can open the HMS IP configurator, go to monitor, turn on a couple robot outputs and see bits change but I can't get the PLC Ethernet\IP to work. I'm attaching screen shots of the PLC and AnyBus configurations. I spent about an hour and a half online with Anybus yesterday and they were not able to figure it out. Could you guys take a look and help me out? Appreciate it guys.
Anybus X-Gateway PN AB7838-F
Last edited: