I need some help with a plc I am working on.... I would like to have 4 push buttons send different analog output signals at one output channel.
example p/b-1 would be say 6ma output> ch.1
p/b-2 would be say 12ma output> ch.1
etc.
I used a mov block and I was just simulating WITH N7.2 and monitoring with N7.3 registers and saw that when the rung was true I saw the value I was looking for but when the rung went false it stayed there and did not go to zero?
example p/b-1 would be say 6ma output> ch.1
p/b-2 would be say 12ma output> ch.1
etc.
I used a mov block and I was just simulating WITH N7.2 and monitoring with N7.3 registers and saw that when the rung was true I saw the value I was looking for but when the rung went false it stayed there and did not go to zero?