Pete_S
Member
Hi,
I have a 315-2 PN/DP CPU. It was programmed in Step 7 V5.5. Then a colleague programmed it in TIA Portal V13 for a test. Now I want to revert it to original program, but Step 7 5.5 fails to connect to the device. It will show up in available devices but every time I try to download to the device it fails. If anyone can advise on what I need to do to roll back to Step 7 5.5 classic I would appreciate it. I am trying to program over the X2 LAN port.
I have a 315-2 PN/DP CPU. It was programmed in Step 7 V5.5. Then a colleague programmed it in TIA Portal V13 for a test. Now I want to revert it to original program, but Step 7 5.5 fails to connect to the device. It will show up in available devices but every time I try to download to the device it fails. If anyone can advise on what I need to do to roll back to Step 7 5.5 classic I would appreciate it. I am trying to program over the X2 LAN port.