Hi all,
I need help in programming a plc (TWDLCAA24DRF TWIDO) which will run a motor (TIFON 1 200M) through a VFD (ATV31HU22N4). The operation of the motor must be as follow.
Accelaration in 1 sec and remain ON for 1 sec and then turns off in 1 sec and remains off for 1 sec
Now acceleration in 2 sec and remain ON for 2 Secs and then turns off in 2 sec but remain off for 1 sec
Now acceleration in 3 sec and remain ON for 3 secs and then turns off in 3 sec but remain off for 1 sec.
Now loop back
and It will continue automatically. It also require an emergency button. Which will stop the operation.
One thing will be the most important that it must not damage the water pump.
I need help in programming a plc (TWDLCAA24DRF TWIDO) which will run a motor (TIFON 1 200M) through a VFD (ATV31HU22N4). The operation of the motor must be as follow.
Accelaration in 1 sec and remain ON for 1 sec and then turns off in 1 sec and remains off for 1 sec
Now acceleration in 2 sec and remain ON for 2 Secs and then turns off in 2 sec but remain off for 1 sec
Now acceleration in 3 sec and remain ON for 3 secs and then turns off in 3 sec but remain off for 1 sec.
Now loop back
and It will continue automatically. It also require an emergency button. Which will stop the operation.
One thing will be the most important that it must not damage the water pump.