We have a MVI46-GSC Prosoft module and are going to use it to receive data from a Bizerba dynamic rail scale and transmit data to an Okidata serial printer using a SLC500. I have it set up to transmit data to the printer out Port 2. But, I am having trouble receiving data on Port 1 in the way I want it. We are using Hyperterminal for testing and we send a string symbol, an exclamation mark, 6 spaces, the weight, an l, and a b. It should look like this in the terminal window: $! 123lb
When I send that out the port, In ASCII I get:
\00^N in N12:0
$! in N12:1
12 in N12:5
3l in N12:6
b^M in N12:7
It is pairing up the characters. I need each character to be put in in a separate word: 1 2 3 l b so I can do the math to convert that back to decimal.
Thanks
When I send that out the port, In ASCII I get:
\00^N in N12:0
$! in N12:1
12 in N12:5
3l in N12:6
b^M in N12:7
It is pairing up the characters. I need each character to be put in in a separate word: 1 2 3 l b so I can do the math to convert that back to decimal.
Thanks