504bloke
Lifetime Supporting Member
A question on replacing PV 1400e's
I have a customer who has quite a few of these and whilst they are excellent the screens dont tend to last as long as the tfts
With this in mind what would you guys recommend as a replacement for these
Yes i know the PV+ is its direct replacement but is it as good at withstanding the hard knocks as the 1400e from the staff on the shop floor ?
I have never used a PV+ so are they any good, still in their infacy ? Firmware / software issues ?
Are the PV+'s interchangeable with different revisons as easy as the PV1400e ?
All the PV1400e's are on DH+ and range from series Aor B through to F i think
Other than the PV+ what other vendors would you suggest for
1. Robust Nema Type Enclosure
2. Long Life Screen
3. Easy to get Repaired
4. Migration from PB1400e to New Screen Easy / Diff / Hard
5. 14" or 15" screen
6. DH+ connection
7. Exisitng Units are Keypad only
I have a customer who has quite a few of these and whilst they are excellent the screens dont tend to last as long as the tfts
With this in mind what would you guys recommend as a replacement for these
Yes i know the PV+ is its direct replacement but is it as good at withstanding the hard knocks as the 1400e from the staff on the shop floor ?
I have never used a PV+ so are they any good, still in their infacy ? Firmware / software issues ?
Are the PV+'s interchangeable with different revisons as easy as the PV1400e ?
All the PV1400e's are on DH+ and range from series Aor B through to F i think
Other than the PV+ what other vendors would you suggest for
1. Robust Nema Type Enclosure
2. Long Life Screen
3. Easy to get Repaired
4. Migration from PB1400e to New Screen Easy / Diff / Hard
5. 14" or 15" screen
6. DH+ connection
7. Exisitng Units are Keypad only