jthornton
Member
I have a PV550 2711-T5A2L1 with DH485. I have the 1747-UIC on my Windows XP laptop. My sketchy notes say to use RS-232 DF1 Driver, 1770-KF3/1747-KE Device, CRC, 1 Stop Bit, Full Duplex, Do Not Auto Configure. However I failed to write down what cable I used. I've looked through my cable suitcase but don't see an obvious cable to use. Anyone have a clue what I need. I must have it as I've done this in the past. I need to download a program from one PV550 and upload to another one for a backup.
I also have a small rack with a power supply and a SLC 5/03 processor...
I have a 1747-C10 SER B and a cross over Ethernet cable.
Thanks
JT
I also have a small rack with a power supply and a SLC 5/03 processor...
I have a 1747-C10 SER B and a cross over Ethernet cable.
Thanks
JT
Last edited: