Oliver Micka
Member
Hi, does anyone know, if PV800 ( 2711R-T7T/T10T ) HMI´s supporting communicate woth CLX L32e/L35e ( 5332e and 5335e ) throught ethernet port ?
I tried creating communication, but something is wrong..
In the CCW -> I selected protocol: Ethernet - Allen Bradley - Compactlogix ( i see only 2 possibility - 5370 or 5380 ),
I tried select 5370.
PLC Adress ( PLC 192.168.0.1 )
Path, 192.168.0.1 - i got ccw error 9001,
Path 192.168.0.1,0,0 ( i found a someplace on the internet this information: select PLC IP adress and behing the address is necessary add this: 0,0 ( 192.168.0.1,0,0 ) - CCW is without error but no comm..
Path 192.168.0.1,1,0 - same issue.
Does anybody know, what is wrong?
Many thanks.
I tried creating communication, but something is wrong..
In the CCW -> I selected protocol: Ethernet - Allen Bradley - Compactlogix ( i see only 2 possibility - 5370 or 5380 ),
I tried select 5370.
PLC Adress ( PLC 192.168.0.1 )
Path, 192.168.0.1 - i got ccw error 9001,
Path 192.168.0.1,0,0 ( i found a someplace on the internet this information: select PLC IP adress and behing the address is necessary add this: 0,0 ( 192.168.0.1,0,0 ) - CCW is without error but no comm..
Path 192.168.0.1,1,0 - same issue.
Does anybody know, what is wrong?
Many thanks.
